Description

---> Please email for ordering <----

The JT Riggers Belt, Standard is a 1.75" riggers belt with a locking V ring for attachment. The webbing is Mil Spec 4088 Type 13, and sewn with #69 thread, and the buckle is a parachute harness quick fit buckle or a locking v-ring in a black phosphate finish. The buckle is rated to 2500 lbs, and the webbing is rated to about 6000 lbs, although I hope you never find out.

This belt is constructed so that three quarters of the belt is doubled and sewn to itself, the last 8 to 10 inches is a single thickness, so it's easy to pass through the buckle. The area after the buckle is sewn with an Box 'X' stitch that is 3 inches long, making it plenty strong enough for holding up your trousers.

The outside of the belt can be covered in loop Velcro so as to mate with a JT 2" Duty Gun Belt, for a small charge. The inside of the belt can be covered in hook Velcro as well, to mate with a JT 1.5" Inner Belt, for a small charge also.

The belt comes standard with a Locking V-Ring Buckle.  If you want the Quick Fit Buckle instead, just note so in the comments section during check-out.  A Non Locking V-Ring can be added to the belt for an extra fee.

*User accepts all responsibilities with use.*

Belt Sizing

Materials

1.75" 4088 Type 13 Webbing
1.5" Hook Velcro
1.5" Loop Velcro
*1.75" Locking V Ring Buckle OR
*1.75" Quick Fit Buckle

Reviews